Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | I | L | M | N | R | S | T | W
Number of items at this level: 44.

A

Abdul Aziz, Abdullah and Md Salleh, M.N and Azam Haron, N. and Zulhaidi Mohd Shafri, H and Fadzilah Ahmad, N (2019) The Important of Horizontal Directional Drilling Standard Technical Requirements. In: Sustainable Civil and Construction Engineering Conference 2018, SCCEC 2018, 25-27 August 2018, University Putra Malaysia Kuala Lumpur.

Abdul Rahman, Prof. Dr. Mohd Nordin (2018) Parallel guided image processing model for ficus deltoidea (Jack) moraceae varietal recognition. In: Lecture Notes in Mechanical Engineering. Pleiades Publishing, pp. 487-503. ISBN 21954356

Abdullah, Prof. Madya Dr. Mohamad Razali (2018) Classification of high performance archers by means of bio-physiological performance variables via k-nearest neighbour classification model. In: Lecture Notes in Mechanical Engineering. Pleiades Publishing, pp. 377-384. ISBN 21954356

Abdullah, Prof. Madya Dr. Mohamad Razali (2018) Talent identification of potential archers through fitness and motor ability performance variables by means of artificial neural network. In: Lecture Notes in Mechanical Engineering. Pleiades Publishing, pp. 371-376. ISBN 21954356

Abdullah, Prof. Madya Dr. Mohamad Razali (2018) The application of support vector machine in classifying potential archers using bio-mechanical indicators. In: Lecture Notes in Mechanical Engineering. Pleiades Publishing, pp. 385-391. ISBN 21954356

Ahmed, S.a and Yaakob, S.B.a and Yusof, A.a (2014) Pitch angle control of a grid connected wind turbine. In: 014 5th International Conference on Intelligent and Advanced Systems: Technological Convergence for Sustainable Future, ICIAS 2014, 03-05 June 2014, Kuala Lumpur, Malaysia.

Alias, R. and Mahmoodian, R. and Abd Shukor, M.H. and Yew, B.S and Muhamad, M. (2018) Enhancement of as-sputtered silver-tantalum oxide thin film coating on biomaterial stainless steel by surface thermal treatment. In: International Conference on Advanced Nanotechnology in Engineering and Medical Science, 20-21 Nov 2017, Langkawi, Malaysia.

Azmi, N. and Sudin, S. and Kamarudin, L.M. and Zakaria, A. and Visvanathan, R. and Cheik, G.C. and Zakaria, S.M.M.S and Alfarhan, K.A. and Ahmad, R.B. (2018) Design and development of multi-transceiver lorafi board consisting LoRa and ESP8266-wifi communication module. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET), 06-08 Dec 2017, Penang, Malaysia.

I

Ismail, J. and Mohamad, M. and Mohamed, S.B. and Mohd, A. and Mohamad, W.N.F. and Ibrahim, Z. and Musanih, M.R. (2016) Down milling cutting parameters optimization utilizing the two level full factorial design approach. In: International Conference on Materials Science and Nanotechnology, ICMSNT 2016, 12-14 May 2016, Seoul, South Korea.

L

Lukman Nul Hakim, M.T. and Hanif, M.L. (2018) Penelitian terhadap pengenalan penggunaan mesin tangan program sijil teknologi pembinaan di Kolej Komuniti Bentong. In: Seminar Kebangsaan Majlis Dekan Pendidikan Universiti Awam 2018, 07 Nov 2018, UniSZA.

M

M.S., Kasim and C.H.C., Haron and J.A., Ghani and M., Zaimi and R., Izamshah and T.J.S., Anand and H.A., Bakar and S.B, Mohamed (2018) Surface texture characterization and chip morphology in ball nose end milling process of Inconel 718 for turbine blades. In: Asia International Conference on Tribology 2018, 17 Sep 2018, Sarawak, Malaysia.

M.S.A., Hafiz and W.N.F., Mohamad and M.S., Kasim and N.S.M., Zainurin and M., Akmal and R., Izamshah and S.B, Mohamed (2018) Machinability of inconel 718 during face mill. In: Asia International Conference on Tribology 2018, 17 Sep 2018, Sarawak, Malaysia.

Mohamed, Prof. Ts. Dr. Saiful Bahri (2014) Chapter 1: Computer Aided Engineering (Analysis of Automated G-Clip Machine Processes and Substation Process with Simulation by using CAD Software). In: Advances in Material and Processing Technologies XV. Trans Tech Publications Ltd, pp. 28-36. ISBN 1662-9752

Mohamed, Prof. Ts. Dr. Saiful Bahri (2014) Chapter 1: Vehicles Engineering (Design Improvement of Automatic Transmission System for Remote Controlled Car). In: Advances in Mechanical and Manufacturing Engineering. Trans Tech Publications, pp. 25-30. ISBN 16627482

Mohamed, Prof. Ts. Dr. Saiful Bahri (2014) Chapter 6: Technologies of Materials Processing (Determining Optimum Electro Discharge Machining Parameters for Drilling of a Small Hole by Utilizing Taguchi Method). In: Advances in Mechanical and Manufacturing Engineering. Trans Tech Publications Ltd, pp. 481-487. ISBN 978-3-03835-108-5

Mohamed, Prof. Ts. Dr. Saiful Bahri and Ab Rashid, Prof. Madya Dr. Radzuwan and Muhamad @ Mohd Saufi, Ts. Dr. Martini (2019) Composite Materials and Types of Machining. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, Singapore, pp. 1-14. ISBN 978-981-13-1804-7

Mohamed, Prof. Ts. Dr. Saiful Bahri and Ab Rashid, Prof. Madya Dr. Radzuwan and Muhamad @ Mohd Saufi, Ts. Dr. Martini (2019) Cutting Parameters and the Machinability Performance. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, Singapore, pp. 15-27. ISBN 978-981-13-1804-7

Mohamed, Prof. Ts. Dr. Saiful Bahri and Ab Rashid, Prof. Madya Dr. Radzuwan and Muhamad @ Mohd Saufi, Ts. Dr. Martini (2019) Learning from the Carbon Fiber-Reinforced Plastic Project. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, Singapore, pp. 49-61. ISBN 978-981-13-1804-7

Mohamed, Prof. Ts. Dr. Saiful Bahri and Muhamad @ Mohd Saufi, Ts. Dr. Martin and Ab Rashid, Prof. Madya Dr. Radzuwan (2019) The Carbon Fiber-Reinforced Plastic Project. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, Singapore, pp. 29-48. ISBN 978-981-13-1804-7

Mohamed, S.B. and Mohamed, W.N.F. and Muhamad, M. and Ismail, J. and Yew, B.S and Mohd, A. and Ibrahim, Z. and Musanih, M.R. (2016) The effects of cutting parameters on surface texture of hybrid composite CFRP/AL2024. In: International Conference on Materials Science and Nanotechnology, ICMSNT 2016, 12-14 May 2016, Seoul, South Korea.

Mohd, A. and Adnan, M.H.L. and Baba, N.B. and Selamat, Z.A. and Rose, A.N.M. and Mohamed, S.B. (2020) Optimization of surface roughness and tool wear on AISI 4140 using coated Ni-YSZ for CNC turning process. In: 4th International Conference on Engineering Technology 2019, ICET 2019, 06-07 Jul 2019, Kemaman, Terengganu.

Mohd Hudzari, Haji Razali (2013) Alkaloid Rapid Detection. In: Persidangan Dan Eskpo Ciptaan Institusi Pengajian Tinggi Antarabangsa, PECIPTA2013, 01 January 1970, Kuala Lumpur, Malaysia.

Mohd Hudzari, Haji Razali (2013) Engineering Technological In Agriculture. In: 2nd International Conference on Mechanical Engineering and Materials, 01 January 1970, Sanya, China.

Mohd Hudzari, Haji Razali and Soran Jalal, Abdullah and Syazili, Roslan and Basri, Ibrahim and Mohd Shahril, Othman and Noordin Asimi, Mohd Noor (2015) Continuous Clean Water Flow Technique in Washing Machine. In: Minggu Penyelidikan & Pertandingan Inovasi 2015 (MPI `15), 14-16 April 2015, UNISZA.

Mohd Rizon, Mohamed Juhari and Abd. Rasid, Mamat and Mohd Fadzil, Abdul Kadir and Azim Zaliha, Abd Aziz and Nurul Ain Najihah, Yusri and Nanaa, K (2015) Determination of mango fruit from binary image using randomized Hough transform. In: 8th International Conference on Machine Vision, ICMV 2015;, 19-21 November 2015, Barcelona; Spain.

Mustafa, M. and Sambas, A. and Vaidyanathan, S. and Zhang, S. and Mujiarto, . and Subiyanto, . and Sanjaya, W.S.M. (2019) A new 4-D chaotic system with self-excited two-wing attractor, its dynamical analysis and circuit realization. In: 1st International Conference on Computer, Science, Engineering and Technology, 27-28 Nov 2018, West Java, Indonesia.

Mustafa, M. and Vaidyanathan, S. and Sambas, A. and Zhang, S. and Mujiartob, . and Subiyanto, . (2019) A chaotic jerk system with three cubic nonlinearities, dynamical analysis, adaptive chaos synchronization and circuit simulation. In: 1st International Conference on Computer, Science, Engineering and Technology, 27-28 Nov 2018, West Java, Indonesia.

N

Nadzifah, Yaakub and Mohd Firdaus, Mahamad Ali and Ahmad Rasdan, Ismail and Mahamad Ali, Abd Rahman (2016) Pengoptimuman Analisis Biomekanik Terhadap Pemain Bola Sepak Menggunakan Kaedah Tindak Balas Permukaan. Jurnal Antarabangsa "Creative Futures" & Warisan, 4 (2). pp. 53-70. ISSN 2289-4527

Noordin Asimi, Mohd Noor (2013) Design, Fabrication and Simulation Analysis for Innovative Hand Tool Harvester. In: International Conference on Advances in Mechanical and Manufacturing Engineering (ICAM2E 2013), 01 January 1970, Kuala Lumpur, Malaysia.

Noordin Asimi, Mohd Noor and Mohd Hudzari, Haji Razali and Sapuan, SSomad (2014) Design, Analysis and Fabrication for Conceptual Innovative Hand Tool. Applied Mechananics and Materials, 564 (1). pp. 752-757. ISSN 1660-9336

Norliana, Yusof and Badariah, Bais and Burhanuddin Yeop, Majlis and Norhayati, Soin (2017) Mechanical analysis of MEMS diaphragm for bladder pressure monitoring. In: 11th IEEE Regional Symposium on Micro and Nanoelectronics, RSM 2017, 23-25 August 2017, Golden Sands Resort Penang Shangri La Batu Feringgi BeachBatu.

R

Roslan, U. and Salleh, N.A. and Muda, W.M.W. (2016) Optimization and economic analysis of grid-photovoltaic electric boat charging station in Kuala Terengganu. In: 3rd International Conference on Mechanical Engineering Research, ICMER 2015, 18-19 August 2015, Pahang, Malaysia.

S

S., Ahmed and S.B., Yaakob and F., Malek and M.A., Rashid (2015) A robust Fuzzy-PI pitch angle controller for wind turbine systems. Applied Mechanics and Materials, 793 (1). pp. 412-416. ISSN 1662-7482

Saiful Bahri, Mohamed (2014) Prediction Of Cutting Force In End Milling Of Inconel 718. Journal of Engineering and Technology, 5 (2). pp. 63-70. ISSN 2180-3811

Saiful Bahri, Mohamed and A., Jameel and M., Minhat (2014) A Review on Intelligence STEP-NC Data Model and Function Bloks CNC Machining Protocol. Advanced materials Research, 845. pp. 779-785. ISSN 1662-8985

Saiful Bahri, Mohamed and Ismail, J and Mohamad, M and Mohamad, W.N.F. and Mohamed, A.S and Mohd, A (2017) Edge Trimming Analysis for Surface Quality of Hybrid Composite - CFRP/Al2024. In: 2017 International Conference on Structural, Mechanical and Materials Engineering, 13-15 July 2017, Seoul; South Korea.

Saiful Bahri, Mohamed and M.K.A.M., Ariffin and Hazami, Che Hussain (2014) Determining optimum electro discharge machining parameters for drilling of a small hole by utilizing taguchi method. Applied Mechanics and Materials, 564 (1). pp. 481-487. ISSN 1662-7482

Saiful Bahri, Mohamed and Seok, Yew Been and Muhamad Ruzlan, Musanih and Zakaria, Ibrahim (2015) Machining parameters optimization for trimming operation in a milling machine using two level factorial design. Applied Mechanics and Materials, 789 (1). pp. 105-110. ISSN 1662-7482

T

Taha, Z. and Mat-Jizat, J.A. and Abdullah, M.A. and Musa, R.M. and Abdullah, M.R. and Ibrahim, M.F. and Shaharudin, M.A.H. (2018) Integrated multi sensors and camera video sequence application for performance monitoring in archery. In: 4th Asia Pacific Conference on Manufacturing Systems / 3rd International Manufacturing Engineering Conference (APCOMS-iMEC), 07-08 Dec 2017, Yogyakarta, Indonesia.

W

W.B., Wan Nik and F., Zulkifli and M.M., Rahman and E.G., Goh and N., Aqilah (2018) Effect of temperature and shear rate on rheological behavior of contaminated marine hydraulic fluid. In: The 2nd Mytribos Symposium, Faculty of Mechanical Engineering, 08 Oct 2018, Skudai, Johor.

Wan Ismail, Dr. W Omar Ali Saifuddin and Yew, Ts. Dr. Been Seok (2020) Bab 8 : Melestarikan Jurutera Mekanikal Dalam industri Berteraskan Kemahiran Profesional. In: Isu-isu Sosial, Kesihatan dan Kelestarian. Universiti Kuala Lumpur, pp. 75-97. ISBN 978-967-2184-33-1

Wan Omar Ali Saifuddin, Wan Ismail (2018) Mechanical Engineers And Professional Skills: Generic Skills And Soft Skills Model Studied. Journal of Fundamental and Applied Sciences, 10 (25). pp. 284-299. ISSN 1112-9867

Wan Omar Ali Saifuddin, Wan Ismail and Ireana Yusra, Abdul Fatah and Hamzah, N and Zaharim, A (2019) Professional Skills Requirement of Mechanical Engineers. In: 4th International Conference on Ergonomics and 2nd International Conference on Industrial Engineering, ICE and ICIE 2019, 27-28 August 2019, Primula Beach Hotel Kuala Terengganu, Terengganu.

Wan Omar Ali Saifuddin, Wan Ismail and Khalid, Jusoh (2018) Innovation and Skills Workers of Mechanical Engineer to Design Smart Flush. International Journal of Engineering & Technology, 7 (2). pp. 30-34. ISSN 2227-524X

This list was generated on Thu Sep 29 01:17:45 2022 +08.