Items where Subject is "T Technology > TS Manufactures"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | I | M | N | S | W
Number of items at this level: 29.

A

Abdullah, M.R. and Musa, R.M and Abdul Majeed, A.P.P. and Musa, A and Kosni, N.A. and Razman, M.A.M (2021) An information gain and hierarchical agglomerative clustering analysis in identifying key performance parameters in elite beach soccer. In: 11th Malaysian Technical Universities Conference on Engineering and Technology, 19-22 Nov 2019, Kuantan.

Ali, Abd Manaf and -, Alitheen and -, N.B. and -, Mashitoh (2010) Cytotoxic effect of damnacanthal, nordamnacanthal, zerumbone and betulinic acid isolated from Malaysian plant sources. International Food Research Journal, 17 (3). pp. 711-719. ISSN 19854668

Ariff, A.F.B. and Omer, H.B. and Javedd, P.M. and Alkbir, M.F.M. (2018) Conceptual design of wheelchair for disabled people suffering with tetra phocomelia disease. In: 4th International Conference on Green Design and Manufacture 2018, IConGDM 2018, 29-30 Apr 2018, Ho Chi Minh, Vietnam.

Azliza, Yacob and Zirawani, Baharum and Nur Sukinah, Aziz and Noor Suhana, Sulaiman and Wan Mohd Amir Fazamin, Wan Hamzah (2019) A review of internet of things: implementations and challenges. In: 4th International Conference on Engineering Technology – ICET 2019, 06-07 Jul 2019, Terengganu.

I

Imran, Abdullah (2013) Pengurusan Harta Intelek Reka Bentuk Perindustrian Melalui Perbandingan Organisasi Berinovasi Di Malaysia. In: Persidangan Keusahawanan Teknologi Kreatif 2013, Anugerah Raja Zarith Sofiah 2013, 01 January 1970, Johor Bharu.

Ismail, W.O.A.S.W. and Ahmad, M.F. and Sobri, S.A. and Abdullah, N.A.N. and Kamarudin, N.M.F.N. and Mohamed, M.A. and Hermawan, A. and Boon, J.G. and Norizan, M.N. (2021) Failure mode and effects analysis (FMEA) of furniture production: A case study in Kelantan state, Malaysia. In: IConGDM 2020, 23-24 Jul 2020, Virtual.

M

Marzuki, Ibrahim and Haytham, Jaradat (2021) The satisfaction of residents of residential homes in Jordan over atrium daylight. In: International Conference On Design Innovation, Social Science & Technology 2020, 26-27 Nov 2020, Langkawi, Kedah.

Mohamed, Prof. Ts. Dr. Saiful Bahri (2014) Chapter 1: Vehicles Engineering (Design Improvement of Automatic Transmission System for Remote Controlled Car). In: Advances in Mechanical and Manufacturing Engineering. Trans Tech Publications, pp. 25-30. ISBN 16627482

Mohamed, Prof. Ts. Dr. Saiful Bahri (2014) Chapter 6: Technologies of Materials Processing (Determining Optimum Electro Discharge Machining Parameters for Drilling of a Small Hole by Utilizing Taguchi Method). In: Advances in Mechanical and Manufacturing Engineering. Trans Tech Publications Ltd, pp. 481-487. ISBN 978-3-03835-108-5

Mohamed, Prof. Ts. Dr. Saiful Bahri (2014) Chapter Manufacturing Engineering (A Review on Intelligence STEP-NC Data Model and Function Blocks CNC Machining Protocol). In: Advanced Materials Research. Trans Tech Publications Ltd, pp. 779-785. ISBN 1662-8985

Mohamed, Prof. Ts. Dr. Saiful Bahri and Ab Rashid, Prof. Madya Dr. Radzuwan and Muhamad @ Mohd Saufi, Ts. Dr. Martini (2019) Composite Materials and Types of Machining. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, Singapore, pp. 1-14. ISBN 978-981-13-1804-7

Mohamed, Prof. Ts. Dr. Saiful Bahri and Ab Rashid, Prof. Madya Dr. Radzuwan and Muhamad @ Mohd Saufi, Ts. Dr. Martini (2019) Cutting Parameters and the Machinability Performance. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, Singapore, pp. 15-27. ISBN 978-981-13-1804-7

Mohamed, Prof. Ts. Dr. Saiful Bahri and Ab Rashid, Prof. Madya Dr. Radzuwan and Muhamad @ Mohd Saufi, Ts. Dr. Martini (2019) Learning from the Carbon Fiber-Reinforced Plastic Project. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, Singapore, pp. 49-61. ISBN 978-981-13-1804-7

Mohamed, Prof. Ts. Dr. Saiful Bahri and Muhamad @ Mohd Saufi, Ts. Dr. Martin and Ab Rashid, Prof. Madya Dr. Radzuwan (2019) The Carbon Fiber-Reinforced Plastic Project. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, Singapore, pp. 29-48. ISBN 978-981-13-1804-7

Mohamed, Prof. Ts. Dr. Saiful Bahri and Yew, Ts. Dr. Been Seok and Musanih langs@unisza.edu.my, Muhamad Ruzlan (2015) Chapter 1: Materials and Technologies of Processing (Machining Parameters Optimization for Trimming Operation in a Milling Machine using Two Level Factorial Design). In: Applied Mechanics and Materials. Trans Tech Publications Ltd, pp. 105-110. ISBN 1662-7482

N

Noor Aina Amirah, Mohd Noor and Wan Abd Aziz, Wan Mohd Amin and Wan Izatul Asma, Wan Talaat and Mohd Shaladdin, Muda (2019) Analysis of Individual Factors on Employees’ Perception towards Safety Culture in the Malaysian Manufacturing Industry. In: 1st Aceh Global Conference (AGC 2018), 17-18 October 2018, Aceh.

Noordin Asimi, Mohd Noor (2013) Design, Fabrication and Simulation Analysis for Innovative Hand Tool Harvester. In: International Conference on Advances in Mechanical and Manufacturing Engineering (ICAM2E 2013), 01 January 1970, Kuala Lumpur, Malaysia.

Noorhayati, Mansor (2013) Corporate Social Responsibility and Environmental Reporting: Disclosure Patterns of Malaysian Manufacturing Companies. In: International Management Conference 2013, 01 January 1970, UNISZA.

Nor Ziratul Aqma, Norzaman and Muhammad Firdhaus, Che Hassan (2013) Redesign BOH Tea Packaging Design. In: Persidangan Keusahawanan Teknologi Kreatif 2013, Anugerah Raja Zarith Sofiah 2013, 01 January 1970, Johor Bharu.

Noroul Asyikeen, Zulkifli and Maaruf, Abd. Ghani and Mohd Bakri, Jali (2019) Confusion in design and facilities of layout plan: GMP requirements. Journal of Engineering and Applied Sciences, 14 (10). pp. 3277-3282. ISSN 1816-949X

Nur Haizal, Mat Yaakob@Ariffin and Marzuki, Ibrahim and Mohamad Hariri, Abdullah (2021) Role of design and innovation to enhance new product development among Malaysian small and medium manufacturing enterprises (SMEs). In: International Conference on Design Innovation, Social Science & Technology 2020, 26 Nov 2020, Online.

S

Saiful Bahri, Mohamed and Abdul Aziz, Abdullah (2019) Identifying key performance indicators for Manufacturing Industries Bumiputera Entrepreneurs (MIBE) in East Coast Malaysia. International Journal of Research and Innovation in Social Science, 3 (4). pp. 391-396. ISSN 2454-6186

Saiful Bahri, Mohamed and Abdul Hakim, Abdullah and Hurun Ain, Ab. Rahman (2018) Konsep Asas dan Prinsip Pembuatan Menurut Islam. Jurnal Islam dan Masyarakat Kontemporari, 17 (1). pp. 51-68. ISSN 2289-6325

Saiful Bahri, Mohamed and Hafiz, M.S.A and Kawaz, M.H.A and Kasim, M.S and Izamshah, R and Saedon, J.B (2017) A review on feasibility study of ultrasonic assisted machining on aircraft component manufacturing. In: IOP Conference Series: Materials Science and Engineering, 12 December 2017, Putrajaya; Malaysia.

Saiful Bahri, Mohamed and S., Maidin and A. S., Mohamed (2018) FEASIBILITY STUDY OF VACUUM TECHNOLOGY INTEGRATED FUSED DEPOSITION MODELING TO REDUCE STAIRCASE EFFECT. Journal of Fundamental and Applied Sciences, 10 (1S). pp. 633-645. ISSN 1112-9867

Saiful Bahri, Mohamed and S., Maidin and A.S., Mohamed and S., Akmal (2018) Feasibility Study Of Vacuum Technology Integrated Fused Deposition Modeling To Reduce Staircase Effect. Journal of Fundamental and Applied Sciences, 10 (1S). pp. 633-645. ISSN 1112-9867

Sazilin, M. and Mohamed, S.B. and Endut, A. and Alkbir, M.F.M. and Bwsar, R. and Rosdi, A. and Syafiq, A. (2018) Evaluation effect of plate electrode characteristics on engine speed performance in application of HHO generator for four-stroke engine. In: 4th International Conference on Green Design and Manufacture 2018, IConGDM 2018, 29-30 Apr 2018, Ho Chi Minh, Vietnam.

W

W Omar Ali Saifuddin, Wan Ismail and Nur Aina Riza, Zahrin and Shahrizal, Ahmad Sobri (2020) Implementation of fault tree analysis (FTA) in manufacturing process: a case study from a wood-based product company. Journal of Critical Reviews, 7 (15). pp. 3086-3096. ISSN 2394-5125

W.O.A.S., Wan Ismail and M. F., Ahmad and S., Ahmad Sobri and N. A., Nik Abdullah and N. M. F., Nik Kamarudin and M., Mohamed and A., Hermawan and J. G., Boon and M. N., Norizan (2021) Failure mode and effects analysis (FMEA) of furniture production: A case study in Kelantan state, Malaysia. In: Proceedings of Green Design and Manufacture 2020, 23 Apr 2020, Online.

This list was generated on Thu Sep 29 00:17:54 2022 +08.