 | Up a level |
Addy Putra, Md Zulkifli and Amirul Fahmi, Razali and Nor Ziratul Aqma, Norzaman (2014) Re-Creation Of Malaysian Traditional Game Namely ‘Baling Selipar’: A Critical Review. International Journal of Science, Environment and Technology, 3 (6). pp. 2083-2086. ISSN 2278-3687
Ahmed, S.a and Yaakob, S.B.a and Yusof, A.a (2014) Pitch angle control of a grid connected wind turbine. In: 014 5th International Conference on Intelligent and Advanced Systems: Technological Convergence for Sustainable Future, ICIAS 2014, 03-05 June 2014, Kuala Lumpur, Malaysia.
Ahmed, S.a and Yaakob, S.B.a and Yusof, A.a and Saha, N.C (2014) Performance analysis and study of economic feasibility of biomass coal co fired power system. In: Proceedings of the 2014 IEEE 8th International Power Engineering and Optimization Conference, PEOCO 2014(IEEE Computer Society), 24-25 March 2014, Langkawi, Malaysia.
Amirul Fahmi, Razali and Addy Putra, Md Zulkifli and Nor Ziratul Aqma, Norzaman (2014) Building The Sets Of Standards For Malaysia Taxi Interior: A Critical Review. International Journal of Science, Environment and Technology, 3 (6). pp. 2113-2119. ISSN 2278-3687
Been Seok, Y. and Y.S., Lee and F., Malek (2014) Shielding Effectiveness of Rice Husk and CNT Composites in X-Band Frequency. International Journal of Electrical, Robotics, Electronics and Communications Engineering, 8 (12). pp. 1592-1595. ISSN 1307-6892
Che Wan Noorakma, Abdullah and Norliana, Yusof and Norhayati, Soin (2014) Corner compensation mask design on (MEMS) accelerometer structure. IEEE Xplore, 1 (1). pp. 248-251. ISSN 1466-4730
M. A., Humayun and F., Malek and Syafruddin, Hasan (2014) Analysis of temperature dependence on solar energy radiation pattern at different wavelengths. ARPN Journal of Engineering and Applied Sciences, 9 (9). pp. 1436-1441. ISSN 18196608
Martini, Muhamad @ Mohd Saufi and P. R., Hornsby and E., Charmicheal (2014) Preparation and Characterisation of Cellulose Nanofibres Reinforced Polymer Composites. Australian Journal of Basic and Applied Sciences, 8 (4). pp. 577-592. ISSN 1991-8178
Md. Abdul, Awal and Sheikh Shanawaz, Mostafaa and Mohiuddin, Ahmada (2014) An adaptive level dependent wavelet thresholding for ECG denoising. Source of the Document Biocybernetics and Biomedical Engineering, 34 (4). pp. 238-239. ISSN 02085216
Md. Bashir, Uddin and Md Zakir, Hossain and Mohiuddin, Ahmad (2014) Effects of Caffeinated Beverage Consumption on Electrocardiographic Parameters among Healthy Adults. Modern Applied Science, 8 (2). pp. 69-77. ISSN 1913-1844 [P]
Mohamed, Prof. Ts. Dr. Saiful Bahri (2014) Chapter 1: Computer Aided Engineering (Analysis of Automated G-Clip Machine Processes and Substation Process with Simulation by using CAD Software). In: Advances in Material and Processing Technologies XV. Trans Tech Publications Ltd, pp. 28-36. ISBN 1662-9752
Mohamed, Prof. Ts. Dr. Saiful Bahri (2014) Chapter 1: Vehicles Engineering (Design Improvement of Automatic Transmission System for Remote Controlled Car). In: Advances in Mechanical and Manufacturing Engineering. Trans Tech Publications, pp. 25-30. ISBN 16627482
Mohamed, Prof. Ts. Dr. Saiful Bahri (2014) Chapter 6: Technologies of Materials Processing (Determining Optimum Electro Discharge Machining Parameters for Drilling of a Small Hole by Utilizing Taguchi Method). In: Advances in Mechanical and Manufacturing Engineering. Trans Tech Publications Ltd, pp. 481-487. ISBN 978-3-03835-108-5
Mohamed, Prof. Ts. Dr. Saiful Bahri (2014) Chapter Manufacturing Engineering (A Review on Intelligence STEP-NC Data Model and Function Blocks CNC Machining Protocol). In: Advanced Materials Research. Trans Tech Publications Ltd, pp. 779-785. ISBN 1662-8985
Mohd Rizon, Mohamed Juhari and M. A., Salam and Q. M., Rahman (2014) Transient Stability Analysis of a Three-machine Nine Bus Power System Network. Engineering Letters, 22 (1). pp. 1-7. ISSN 1816-0948
Mohd Rizon, Mohamed Juhari and Md. Bashir, Uddin and Mohiuddin, Ahmad (2014) “Cardiac function evaluation analyzing spectral components due to the consumption of energy drinks”. Research Journal of Applied Sciences, Engineering and Technology, 7 (18). pp. 3906-3915. ISSN 2040 7459
Moniruzzaman, M.a and Hawlader, M.A.K.a and Hossain, M.F.a (2014) SVD and chaotic system based watermarking approach for recovering crime scene image. In: 8th International Conference on Electrical and Computer Engineering: Advancing Technology for a Better Tomorrow, ICECE 2014, 20-22 December 2014, Pan Pacific Sonargaon DhakaDhaka; Bangladesh; 20 December 2014 through 22.
Noordin Asimi, Mohd Noor and Mohd Hudzari, Haji Razali and Sapuan, SSomad (2014) Design, Analysis and Fabrication for Conceptual Innovative Hand Tool. Applied Mechananics and Materials, 564 (1). pp. 752-757. ISSN 1660-9336
Norliana, Yusof and Che Wan Noorakma, Abdullah and Norhayati, Soin (2014) Corner compensation mask design on (MEMS) accelerometer structure. In: 11 th IEE, 10 October 2014, Kuala Lumpur, Malaysia.
Saiful Bahri, Mohamed (2014) Design Improvement of Automatic Transmission System for Remote Controlled Car. Applied Mechanics and Material, 564 (1). pp. 25-30. ISSN 1662-7482
Saiful Bahri, Mohamed (2014) Prediction Of Cutting Force In End Milling Of Inconel 718. Journal of Engineering and Technology, 5 (2). pp. 63-70. ISSN 2180-3811
Saiful Bahri, Mohamed (2014) Retrofitting a conventional lathe to a digital intelligence system. In: 2nd International Conference on Artificial Intelligence and Computer Science 2014, 15 September 2014, Bandung, Indonesia.
Saiful Bahri, Mohamed (2014) A Review on Intelligence STEP-NC Data Model and Function Bloks CNC Machining Protocol. In: MIMEC 2013, 04 December 2013, Johor Bharu.
Saiful Bahri, Mohamed and A., Jameel and M., Minhat (2014) A Review on Intelligence STEP-NC Data Model and Function Bloks CNC Machining Protocol. Advanced materials Research, 845. pp. 779-785. ISSN 1662-8985
Saiful Bahri, Mohamed and M., Alias and A., Wan Ab Aziz (2014) Strategic Human Resource for Lean Management involving Quality and Operational Performance. Australian Journal of Basic and Applied Sciences, 8 (4). pp. 752-760. ISSN 1991-8178
Saiful Bahri, Mohamed and M.K.A.M., Ariffin and Hazami, Che Hussain (2014) Determining optimum electro discharge machining parameters for drilling of a small hole by utilizing taguchi method. Applied Mechanics and Materials, 564 (1). pp. 481-487. ISSN 1662-7482
Saiful Bahri, Mohamed and W.A., Wan Ab Aziz and Ibrahim, M.S. Muda (2014) Strengthening of Islamic Quality Management Practices Through Culture of Perfection (ITQAAN) and the Value of Courtesy (IHSAN) Toward The Business Performance of Muslim Entrepreneur. Advances in Natural and Sciences, 8 (4). pp. 237-243. ISSN 1995-0772
Saiful Bahri, Mohamed and Wan Asri, Wan Ab Aziz and Mohd Shaladdin, Muda (2014) Islamic Quality Management Toward Business Operation of Malaysian Moslem Entrepreneurs. Journal of Basic and Applied Scientific Research, 4 (3). pp. 1-7. ISSN 2090-4304
Seok, Yew Been and Fwen Hoon, Wee (2014) Agricultural Waste Based-Coco Peat Microwave Absorber. International Journal Of Engineering Sciences And Emerging Technologies. pp. 1-8. ISSN 2231-6604
Shahrul Anuwar, Mohamed Yusof and Imran, Abdullah and Irfan, Mohamad (2014) The Issues Of Facemask Among Hajj Pilgrims: A Critical Review. International Journal of Science, Environment and Technology, 3 (4). pp. 1528-1534. ISSN 2278-3687 (O)
W Omar Ali Saifuddin, Wan Ismail and A. N. M. Enamul, Kabir (2014) Extraction of Inherent Frequency Components of Multiway EEG Data Using Two-Stage Neural Canonical Correlation Analysis. Modern Applied Science, 8 (1). pp. 164-175. ISSN 1913-1844 [P]
Yew, B.S (2014) Investigation of rice Husk/CNTs composites performance in microwave properties. In: 1st Applied Electromagnetic International Conference, APPEIC 2014, 16-18 December 2014, Bandung; Indonesia.
Yew, B.S and Mohd Rizon, Mohamed Juhari and Saiful Bahri, Mohamed (2014) Full Ground Plane Dual-Band Microstrip Antenna for ISM and HiperLAN/2 Applications. In: 2014 IEEE Conference on Open Systems (ICOS 2014), 26-28 October 2014, Grand Dorsett Subang Jaya, Malaysia.
